How to distinguish and purchase the natural wood veneer veneer furniture, first of all, the plate furniture should pay attention to the substrate, the substrate is the choice of splint, MDF, particle board, fiberboard or other plates, should have their characteristics and shortcomings Understand that the quality of the substrate is also neglected. The substrate is usually made by mixing and compressing glue. The environmental protection of glue is definitely the key point that cannot be ignored. Is it E0 or E1? It is understood that the higher the environmental protection level of the substrate, the smaller the release amount of formaldehyde, the smaller the odor emitted, and the smaller the damage to the human body. Therefore, it is important to choose whether the furniture substrate is environmentally friendly. Secondly, the choice of panel furniture should pay attention to the materials of the facing. Now there are many fake materials on the market. It is obviously a paper material, but it is a veneer. It is obviously a low-end material. It is a high-grade material. Know more, or find some experts to see, in order to ensure that the products you buy are what you want. After all, this furniture is what you can see every day, and you can't force it. It is also true that there is a method of natural veneer veneer furniture. It mainly depends on the wood grain and wood ray of natural veneer. Is there a natural flaw? Because natural veneer is made of natural wood, its texture must be natural, and the texture lines are not obvious. The artificial veneer is generally dull and blunt. The thickness of the conventional natural veneer currently used is about 0.5MM. When the furniture is made, it encounters two adjacent interfaces. Usually, it does not turn, but each piece is attached, so the two interfaces The wood grain usually should not be connected to the sticker--the wood grain and the wood ray are clearly visible. Even if it is imported high-grade paper, even the wood enamel can be copied, but it is different from the natural veneer, which is more fake. Sticker furniture is easy to reveal flaws at the corners. In addition, because the thickness of the grain paper is very small (0.08MM), it will be directly wrapped at the junction of the two planes, causing the wood grain of the two interfaces to be connected (usually the longitudinal section). Finally, look at whether the processing technology is careful. Natural veneer veneer furniture mainly depends on whether the veneer veneer has blistering, cracking, whether there is a phenomenon of lifting on the edge, whether the edge banding is firm enough, whether the color of the paint is Consistent, and do the natural veneer veneer furniture with open paint, but also to see if the thickness and uniformity of the paint are qualified, otherwise the table, the coffee table, etc. will not be in place due to the paint, and there will be water or air humidity for a long time. Too much will cause the veneer to wrinkle or even fall off.