The method of distinguishing technology veneer is actually very simple. The biggest feature is that the length and width of natural veneer are not long and long. Because it is natural, the specifications on cutting and cutting are definitely different, and artificial veneer (technical veneer) The logs are the specifications that have been specified, so the veneers are all 2500mm long and 640mm wide (because the splints are all the same), and the second is that the artificial veneer has almost no defects, such as dead knots, wormholes, discoloration, Mineral lines, shadows, etc., so this is why the price of artificial veneer is not as large as the price of natural veneer, because the same natural veneer is good or bad, and the technical veneer is all the same, of course, the same kind of technical veneer will have many Different models.
Generally speaking, the sticker will produce a plastic-like shine in the light of the light; the veneer material may have a slightly lower illuminance, and the wood is natural and the reflection is soft. Also look at the edge banding and closing, if it is a sticker material, usually pvc edge banding, although the edge is thin and thick, but in general it is easier to identify; and the veneer material is usually sealed with veneer, The material is the same as the surface.